Our CNC Equipment Details
|
CNC Turning Centre (with tail stock) Admit 0-500 mm / Dia. 285 mm, Daewoo Make |
1 No. |
|
CNC Turning Centre (with tail stock) Admit 0-250mm . Dia 250 mm, Lokesh-Hyd. Make |
1 No. |
|
CNC Turning Centre (with tail stock) Admit 0-750mm / Dia250 mm, Marshal Make |
1 No. |
|
CNC Turning Center (Double Head without tail stock) Dia 250mm – Admit 200, Marshal Make |
1 No. |
|
CNC Turning Centre (with tail stock) Admit 0-500 mm / Dia. 300 mm, Batliboi Make |
1 No. |
|
CNC Turning Center (with tail stock) Admit 0-250 mm / Dia. 180 mm, Batliboi Make |
1 No. |
Other Details of the Machines
|
HMT / KIRLOSKAR / PSG Gen. Purpose Lathes, 0-1000 mm / 200 mm, with Copying Attachments |
1 Each |
|
General Lathes for roughing turning
|
15 No. |
|
HMT Milling Horizontal, (200 x 800 mm) Bhamber Make Universal Milling with Dividing / Vert. Heads (250x800mm) |
1 Each |
|
General Milling Machines 1.5 No. Horizontal |
1 No. |
|
Cylindrical Grinder SMITHSON 0-1000 mm, 170 mm |
1 No. |
|
Cylindrical Grinder RIAT 0-700 mm, 170 mm swing |
1 No. |
|
Spline Hobbing Machines, 4 Module, 800 mm |
4 No. |
|
Gear Shaper stroke 200 mm, Base Bore 50 mm |
3 No. |
|
Band Saw Machines 170 mm Capacity |
3 Nos. |
|
Tapping Machine, 0-25 mm Two Nos. |
1 No. |
|
Broaching Machine, 30 T Capacity |
1 No. |
|
Mig Welding Machine, 300 Amps with Round Welding auto Arm / Auto Cycle Attachment with Servo Control. |
1 No. |
|
Generating Set 100 KW |
1No. |
|
THREAD ROLLING/SpLine Rolling MACHINE, 40 Tons Cap., |
1 No. |
|
Drilling Machine, 0-15mm, 0-25, 0-38 /power feed |
2 Nos. |
|
Centerless Griders, AMT Make |
2 Nos. |
Inspection Instruments & Other Details
|
Verniers 0-200/300/500/700/1000 mm |
20 Nos. |
|
Digital Verniers 0-200 mm, 0-300mm |
3 Nos. |
|
Micrometers 0-25/25-50/50-75/75-100/100-125,125-250 |
20 Nos. |
|
Digital Micrometers 0-25/25-50/50-75/75-100/100-125/125-250 |
6 Nos. |
|
Digital Micrometers, 0-25,25-50 mm |
2 Nos. |
|
Ht. Guages, 0-300mm |
1 No. |
|
Digital HT Guage 0-600mm |
1 No. |
|
Surface Plates 400x600 mm C.I. |
1 No. |
|
Surface Plates 200x200 mm C.I. |
2 Nos. |
|
Dial Bore Guages 8-16, 16-36, 36-60, 60, 100 |
5 Nos. |
|
Puppy Dial 10 Micron & 2 Micron Resolution |
3 Nos. |
|
Gen. Dials 10 Micron & 2 Micron Resolution |
8 No. |
|
Comparator Stands, Std. Pins, Snap Gauges, Spl. Gauges, Serr. Gauges, Groove Snap Gauges, Angle Gauges, Radius Gauges, Thread Pitch Checking Gauges etc,. |
1 No. |
|
Magna-Fluxing (Magnafield Make) Crack Detection Equipment for shafts and pins. |
1 No. |
|
|
|
|
|
|
 |
 |
 |
 |
